Användarmanual 16 < back to the table of contents > DAT-modul Modulkonfiguration Beskrivning Huvudfördelning Välj enfas- eller trefasdrift: Enfasdrift Trefasdrift Installationsposition Ovansida Undersida Fasföljd 123 321 Strömriktning Normal riktning Omvänd riktning In this configuration, when energy flows in direction “1” (green arrow), the power is displayed with a positive sign. If the PV system feeds energy into the grid (direction “2” – yellow arrow), the power is shown with a negative sign. “Total actual imported energy” refers to energy drawn from the grid. “Total actual exported energy” sums the energy fed into the grid by the PV system. Solcellsanläggning Välj enfas- eller trefasdrift: Enfasdrift Trefasdrift Installationsposition Ovansida Undersida Fasföljd 123 321 Strömriktning Normal direction Omvänd riktning A DAT-Module of the SA variant is used in this installation. The module is mounted after the main switch, similar to the KA variant. This can be identified by the upwardfacing terminals of the DAT-Module. To display the generated power with a positive sign, the “normal direction” must be selected for current flow. The energy produced by the PV system is shown under “Total actual imported energy”. Batterilagring Välj enfas- eller trefasdrift: Enfasdrift Trefasdrift Installationsposition Ovansida Undersida Strömriktning Normal direction Omvänd riktning The SA variant of the DAT-Module is mounted after the main switch, similar to the KA variant. This is also indicated by the upward-facing terminals. The module operates in single-phase mode. To display the energy fed from the battery into the grid with a positive sign (direction “4” – blue arrow), the “normal direction” must be selected. This energy is shown under “Total actual imported energy”. If energy is stored from the PV system into the battery (direction “3” – red arrow), it is accumulated under “Total actual exported energy”. Fortsättning på nästa sida Tabell 8: Konfiguration av DAT-modulerna som visas i figur 10
RkJQdWJsaXNoZXIy MTAxNzE=