User Manual 12 < back to the table of contents > 4.5 Connection Options for the DAT-Module The two variants of the DAT-Module can be flexibly adapted to different installation requirements. The following parameters can be configured individually: • Operation in single-phase or three-phase mode • Installation position • Rotation direction of the rotating field • Current flow direction A detailed guide on how to configure these settings can be found in Chapter 7.5 Edit Configuration. The wide range of configuration options allows the DAT-Modules to be flexibly adapted to various application scenarios. This section explains several typical configurations using practical examples. Figure 9 illustrates the connection options for the KA variant of the DAT-Module in three-phase operation. The example shown includes: • A grid connection as supplier/consumer • A PV system as an additional supplier • A connected load (consumer)
RkJQdWJsaXNoZXIy MTAxNzE=