User Manual 17 < back to the table of contents > Continued from Table 8 on page 16 DAT-Module Module Configuration Description Workstation 1 Choose 1-phase or 3-phase mode: 1-phase mode 3-phase mode Installation position Top Bottom Current Normal direction Inverted direction The module is mounted with downward-facing terminals, meaning it is installed before the main switch, similar to the KA variant. Since the phase conductor is connected to terminal X3, the installation position must be set to “Bottom”, otherwise the measurements will be incorrect. To display the power consumed by the workstation with a positive sign, the “inverted direction” must also be selected. The energy drawn from the grid is shown under “Total actual imported energy”. Workstation 2 Choose 1-phase or 3-phase mode: 1-phase mode 3-phase mode Installation position Top Bottom Current Normal direction Inverted direction The module is mounted with downward- facing terminals, thus installed before the main switch, similar to the KA variant. The phase conductor is connected to terminal X1, so the installation position must be set to “Top”. To display the power consumed by the workstation with a positive sign, the “normal direction” must be selected. The energy drawn from the grid is shown under “Total actual imported energy”. Workstation 3 Choose 1-phase or 3-phase mode: 1-phase mode 3-phase mode Installation position Top Bottom Current Normal direction Inverted direction The module is mounted with upward-facing terminals, meaning it is installed after the main switch, similar to the KA variant. Since the phase conductor is connected to terminal X1, the installation position must be set to “Top” to ensure correct measurements.To display the power consumed by the workstation with a positive sign, the “inverted direction” must also be selected. The energy drawn from the grid is shown under “Total actual imported energy”.
RkJQdWJsaXNoZXIy MTAxNzE=