User Manual 44 < back to the table of contents > 12.1.2 IP Network Servicese By default, the ports are set to 443 for HTTPS and 80 for HTTP. These can be changed if necessary. Figure 42: Default settings for HTTPS and HTTP 12.1.3 Configuring the Wireless Network (WLAN) To connect the COM-Module to an existing wireless network, WLAN must be enabled in the settings. The following parameters are required to establish a connection:: 1. Wireless Network Name (SSID): Enter the name of the existing wireless network. 2. Security: Select the desired security standard to be used for the connection. 3. Wireless Network Password: Enter the password for the wireless network. Figure 43: Wireless Network Configuration, 1. Enables WLAN, 2. Input field for the SSID of the existing network, 3. Choose the encryption method to be used for the connection, 4. Enter the password for the selected wireless network, 5. Restarts the application to save the changes After the software has restarted, the status of the WLAN connection can be viewed under Device (COM). 1 2 3 4 5
RkJQdWJsaXNoZXIy MTAxNzE=