User Manual 47 < back to the table of contents > Figure 47: Adding a DAT-Module to the Modbus list, 1. Enable the Modbus connection, 3. Assign an ID, 3 and 4. Select a module, 5. Add to list, 6. Save the changes, 7. Restart the software to apply the changes The default port for the Modbus TCP connection is set to 502. If necessary, this value can be changed. The port configuration options can be found under Configuration → Modbus, directly below the section for adding a DAT-Module. After all settings have been configured, the software must be restarted to apply the changes. Figure 48 shows the available configuration options for the Modbus port. 1 2 5 4 7 6 3
RkJQdWJsaXNoZXIy MTAxNzE=