User Manual 53 < back to the table of contents > 12.4.1 User LED Configuration The USER LED on the COM-Module can be triggered by various events. Figure 57: Configuration Options for the USER LED on the COM-Module 12.4.2 Alarm Configuration To use the alarms, the LUA script must be activated. Figure 58: Activating the LUA Service 12.4.3 E-Mail Service The email service is used to send messages, configured under the “Alarms” tab, to the user. If debug information should be stored in the log files, the checkbox “Enable Debugging” must be selected. Figure 59 shows the interface for activating the “Email Service” and “Debugging”. Figure 59: Activating Email Service and Debugging As shown in Figure 59, the following settings can be configured for connecting to an SMTP server:: 1. SMTP Server Address: The address used by the selected email provider to send emails. This is provided by the provider and can usually be found on their website. 2. 2. Connection Security Mode: The following encryption options are available: a. No Encryption: No encryption is used. b. STARTTLS: Establishes an unencrypted connection first, which can then be upgraded to a secure connection if supported. c. TLS: Transport Layer Security is a protocol that establishes a secure, encrypted connection from the beginning.
RkJQdWJsaXNoZXIy MTAxNzE=