42 Hot Water Isolator Kits - Compliant to AS / NZS 3000:2007 and 2018 EV Isolators Hot Water Isolator Kits Hot Water Isolator - Switch Only in 650VH WE plate Padlockable Safety Switch - 3F Handle Torque Test Compliant to AS/NZS 60947-3 as a Switch Disconnector The K&N EV Charger Isolators safely switch the Neutral and comply to all New Zealand EV installation requirements 1.5m flex condult with glands, 1.8m 2.5mm of cable, 2 x 32A Connectors and 650VH Plate, Mounting Block 2 x 32A connectors and 650VH plate AS/NZS 3000: 2007 & 2018 2.3.2.2.1 Isolator Requirements (precis) • Shall be capable of withstanding impulse voltages • Shall not falsely indicate the contacts are Open • Shall prevent unintentional closure by impact, vibration, etc. • Shall be mounted in a readily accessible location • Shall clearly indicate the Off position • Shall disconnect all conductors AMPS kW Loom 230VAC AMPS kW 230VAC ENCLOSURE AMPS kW H x W x D 415VAC AMPS kW 20 kW 2.5mm 32 7.3 4.0mm 32 7.4 Verticle 32 7.4 HorIzontal 32 7.4 160 x 85 x 80 20 11 160 x 85 x 80 40 22 190 x 100 x 91 20 4.6 32 7.3 ORDER CODE SHORT CODE EACH ORDER CODE SHORT CODE EACH ORDER CODE SHORT CODE EACH ORDER CODE SHORT CODE EACH 70089043 KNHWS20AK 130.41 70090640 KNHWS32AK 160.67 70089142 KNEV232 107.34 70089143 KNEV232H 107.34 70078586 KNEV232 - IP66 214.05 70089144 KNEV420 - IP66 205.51 70089145 KNEV440 - IP66 299.91 70089042 KNHWS20A 72.43 70089147 KNHWS32A 94.16 Flush mount - Single Phase + Switched Neutral, 1 x 32A connector, PDL 300 Series VW plate Surface mount - Single & Three phase + Switched Neutral - IP66/67 - UV Stable Enclosure • Other EV switch options available on request
RkJQdWJsaXNoZXIy MTAxNzE=