CONTROL SWITCHES & LOAD SWITCHES www.krausnaimer.com 56 MAIN CATALOG Stop and go devices Ordering data: Operation of the stop and go device. V160 The stop and go device prevents a fast switching through the centre OFF position, only possible at a 60° switching angle. The stop and go device only becomes activated in the centre switch position, either in both or just in single direction. (Size S0) Interlock between switches Ordering data: Specify interlocking modus V600/B For 2 switch columns (Size S1 – S3) V600/C For 3 switch columns (Size S1 – S3) An interlock between 2 or 3 switch columns permits the operation of one switch only when the other switch or switches are located in a pre-determined switching position. For heavy duty service reinforced devices are available. Size ABDD3E F GMS S1 48 66 8,5 5 62 128 194 23,2 1,4 – 4,5 S2 68 93 11,2 6 92 183 276 30 1,5 – 7 S3 88 144 14 7 130 274 418 24 1,5 – 8,3 V600/B V600/C Auxiliary contacts Ordering data: Quantity, operation of the auxiliary contacts and type of contact system. M510B Cam controlled (Size S1 (except CA10B), S2, S3) These particular type of auxiliary are controlled by a programmable cam. The max. number of Auxiliary contacts for switches of size S1 and S2 is 4 contacts and for switches of size S3 is 6 contacts. Select between a contact system with a rigid bridge for excellent AC-15 make and break capabilities or an H-bridge design with „cross-wire“ contacts (sizes S1 and S2) for low voltage low current. A second contact system with gold or gold plated contacts is available suitable for use in an aggressive (harsh) environment. In cases where more than 4 - 6 Auxiliary contacts are required, (depending on the frame used) an auxiliary switch should be used as an alternative. Front panel mounting Base mounting Front panel mounting (Mounting E) Base mounting (Mounting VE) Size M D Size M D S1 16 64 S1 11,5 64 S2 18,7 84 S2 11,7 84 S3 17 128 S3 8 128 Ø D M Ø D M Optional extras Ø D3 Ø D3
RkJQdWJsaXNoZXIy MTAxNzE=