05/2024 Optional Extras and Enclosures Catalog 101
Kraus & Naimer The development of the Blue Line rotary switch and motor starter product ranges is based on more than hundred years experience by Kraus & Naimer in the design and manufacture of electrical switchgear. Kraus & Naimer pioneered the introduction of the cam operated rotary switch and continues to be recognized as the world leader in that product field. BLUE LINE Blue Line products are protected by numerous patents through-out the industrial world. They are built to national and international standards and designed to withstand adverse temperatures and climates. Blue Line products are accepted and universally recognized for their quality and workmanship. They are supported by a worldwide sales and service organization. The Kraus & Naimer Registered Trademark WORLDWIDE SYMBOL FOR QUALITY SWITCHGEAR
Contents Description Dimensions Page Page Construction Data 4 - How to order 5 - Optional Extras: Add-on Face Plates 24 41 Auxiliary Contacts 10 29 Bayonet/Switch Coupling 13 34 Control and Indicator Lamp Devices 9, 10 29 Door Clutches 7, 8 28, 31 Electromechanical Interlock 12 33 Ground and Neutral Terminal 13 35 Indicator Lamp Devices 10 31 Interlock between Switches 11 32 Key-lock Devices 17-20 36-39 Motor Drive 16 35 Padlock Devices 21 39, 40 Protective Cover 13 - Push Button Interlock 12 33 Push-pull Interlock 11 32 Ratchet Coupling 15 34 Shaft Extension 6 28 Slip Clutch 15 34 Special Drive Units 14 35 Spring Return over several Positions 15 31 Stop and Go Device 11 31 Tandem Drives 13 32 Terminal Lugs 6 - Trip Devices 16 34 Trip Indicator 8 - Uni-directional Interlock 15 - Switch Type Variations 23 40, 41 Enclosures 25-27 42-44 Blue Line Switchgear: Summary 46 -
< back to table of contents > 4 Construction Data The large cam switch line of the A, C, CA, CAD, CG, CH, CHR, D, L and X-series is complemented by a large number of optional extras and enclosures. This substantial number of optional extras and enclosures is needed in order to meet the requirements of the world market. One or more optional extras may be used in combination with any one switch provided they are of the same switch size. A few exceptions where this cannot be accomplished are noted on the following tables. In some cases, for technical strength or esthetic reason, it may be desirable that a switch be combined with an optional feature of the next larger switch size. Many options provide for such a possibility. Enclosures are manufactured from plastic or aluminum material. They offer a high degree of protection (up to IP 66/67) thereby permitting switch operation under adverse environmental conditions. All KL- and KS-enclosures are flame resistant in accordance with UL94V-0. The materials used provide considerable strength and the best possible protection against corrosion. A large number of possibilities exist for combining switches, enclosures and appropriate optional extras.
< back to table of contents > How to order Disconnectors and Main Switches with Optional Extras acc. to IEC 60947-3 see Catalog 500 When ordering Blue Line cam switches with optional extras, the following method of coding is required. Details on the enclosures and optional extras are shown in this catalog. 1. Switch Type See Catalog 100, 110, 120, 130 or DC-Switch G20/G20S. 2. Switch Function See Catalog 100, 110, 120, 130 or DC-Switch G20/G20S. 3. Type of Mounting See Catalog 100, 110, 120, 130 or DC-Switch G20/G20S. 4. Enclosures The assigned code numbers for the various enclosures are shown in this catalog on pages 25-27. CA20B A202 PN V840G/ 5. Optional Extras Pages 6-24 list optional extras and their coding. A indicates the switch sizes in which the optional extra shown is available. Possible combinations of switches of the same switch size with an optional extra of the next larger switch size are indicated by a . Only in this case indicate the next larger switch size in front of the coding. There are some optional extras in existence which are available in a variety of programs. Additional ordering data may, therefore, be required. In the above case, a color description is required for the cover and handle disc. A11 S1 A11C S2 A25 S1 A25C S2 C26 S1 C26C S2 C32 S1 C32C S2 C42 S1 C43 S2 C80 S2 C125 S2 C200-4 S2 C315 S3 C316 S3 CA4 S00 CA4N S00 CA4-1 S00 CAD4-1 S00 CA10 S0 CA10R S0 CA10B S1 CA11 S0 CA11B S1 CA20 S0 CA20B S1 CA25 S0 CA25B S1 CA40 S1 CA50 S1 CA63 S1 CAD11 S0 CAD12 S0 CG4 S00 CG4-1 S00 CGD4-1 S00 CG6 S00 CG8 S0 CH6 S00 CH10 S0 CH10B S1 CH16 S0 CH16B S1 CHR6 S00 CHR10 S0 CHR10B S1 CHR16 S0 CHR16B S1 DK10 S0 DH10 S0 DHR10 S0 DH10B S1 DK11 S0 DH11 S0 DHR11 S0 DH11B S1 DHR11B S1 DK12 S0 DKR12 S0 DH12 S0 DHR12 S0 DH12B S1 DHR12B S1 G20 S0 G20S S0 L350 S2 L351 S2 L400 S3 L600 S3 L630 S2 L631 S2 L800 S3 L1000 S2 L1200 S3 L1600 S3 L2000 S3 X200 S3 X400 S3 X630 S3 Switch Size of Types Mounting Switch Size of Types Mounting Switch Size of Types Mounting Switch Size of Types Mounting 5
< back to table of contents > 6 1The coding of the switch type may change as shown in Catalog 100, 120 and 130, page 6. Code Optional Extras For Switch Sizes S00 S0 S1 S2 S3 With asymmetric profile Shaft length not adjustable Shaft with unlimited adjustable length with set screw with shear ring Adjustable shaft can be set to the desired length in a pre-mounted switch with VE mounting plate. With square profile Shaft length not adjustable 6 mm 5 mm Shaft with unlimited adjustable length with set screw with clamping bushing Terminal Lugs Ordering data: Free shaft length or dimension from mounting surface to cover. For screw with wire clamps Terminal lugs facilitate the connecting of wires in installations where the terminals are not easily accessible. All X switches, L switches and switches type C315/ C316 will be supplied with terminal lugs as standard. Terminal lugs for quick connect termination Each quick connect terminal may accept either one 6,3 mm quick connect lug or two 2,8 mm quick connect lugs. Switch type CA4 only accepts one quick connect lug 2,8 mm. Shaft extension 1 CA4 CH6 G20 G20S 1 CH10 CH16 DH10 DK10 G20 G20S A11 A25 C26 C32 C42 1 A11 A25 CH10B CH16B DH10B M900 M930 L100 L100B M004D L100A L105A M004E Dimensions p.28 Dimensions p.28
< back to table of contents > Standard Door Clutch Ordering data: Dimension from face of the switch to the cover or dimension from mounting surface to cover as well as the interlock program and the color selection. 7 With shaft extension, shaft with unlimited adjustable length shaft fixation with set screw Front protection IP 40 Front protection IP 66/67 Door clutches M700/M7011 For 3 padlocks Handle lockable with padlocks Protection IP 66 The face Plate is available in black, yellow and alu. The handle may be supplied in black and red. The door coupling has a door-interlock in position “I”. If a padlock device is being used, the door-interlock is in position “0”. Normally, the cabinet door can be opened only if the switch is in position “0”. The door-interlock can be unlocked in position “I” with the included special tools. A maximum of 3 padlocks with shackle diameter up to 8 mm is allowed. In addition, a shaft extension is required. Standard handle and standard face plate Protection IP 66 The door-interlock unlocks in position “0” (for size S0 - S2). In addition, a shaft extension is required. Unlock insert for the M700 ff. To open the door in ON-position. (After the locking has been made inactive, it is necessary to take effective precautions against an opening of the door by unauthorized persons.) Door clutches M800/M810.1 For 3 padlocks Door clutch utilizes a simple and robust design and features a compact size. It has an interlock in the ON-position while a padlock can be fitted in the OFF-position. The door clutch may be opened only if the switch is in the OFF-position. In special cases, however, authorized people have a requirement to open the door, even if the switch is in the ON-position. Further characteristics are the single hole mounting with IP 66/67 protection degree, as well as the Accepted Misalignment up to ± 3 mm horizontally and ± 5 mm vertically. Maximum 3 padlocks with a minimum shackle diameter from 5 up to 7,5 mm are possible. Code Optional Extras For Switch Sizes S0 S1 S2 S3 Dimensions p.30 Dimensions p.30 Dimensions p.30 M280E M280E/.EF mm 4 ‑ 8 M700 M701 S1D M700 29 mm 5 ‑ 7,5 M800 M810
< back to table of contents > Code Optional Extras For Switch Sizes S0 S1 S2 S3 Single hole mounting 22 mm, protection IP 66. Additional profile extension parts and shaft extension must be specified. For shaft extension For profile extension parts With padlock device and single hole mounting 22 mm, protection IP 66. Additional shaft extension must be specified. For 2 padlocks For 2 padlocks For 3 padlocks For 4 padlocks The cover disc is available in black, yellow and electro-gray. The handle may be supplied in red, black and electro-gray. Up to 4 padlocks Operation of the locking bar from the front. Available in black, red and electro-gray. Centering aid for simplified door clutches with single hole mounting and shaft extension Misalignment between the shaft and mounting are compensated in all 4 directions. Simplified Door Clutch M295/.A M295/.B mm 6 ‑ 8 V840E mm 6 ‑ 6,5 V840D mm 7 ‑ 8 V840G mm 4 ‑ 7 V840F mm 3 - 7 4 ‑ 7,5 V845 M600 Dimensions p.29 With square face plate With rectangular face plate The trip indicator used on switches with spring return positions. It includes a colored indicator to show the last spring return position that handle has been turned. Two possibilities for flag indicator exist: a) left red - right green b) left green - right red Trip Indicator Ordering data: The color to appear after left or right operation. M120/A M120/B 8
< back to table of contents > Code Optional Extras For Switch Sizes S00 S0 S1 S2 Dimensions p. 29 Dimensions p.29 9 Q1201 Q120/F1 For 1 lamp with BA9s socket Max. power 2 W, Protection IP42 The control and indicator device with total switching angle of 360° includes a single hole mounting 22/30 mm with locking nut and can be mounted and dismounted without tools. The following front end assemblies are available: - Front ring (alternatively with add-on face plate) - Face plate 48 x 48 mm (alternatively with add-on face plate) - Face plate 64 x 64 The operation may be as follows: - Turn to operate - Push-to-turn operation (e.g. discrepancy switch Q120/F) The push-to-turn version is available with 1 or 2 auxiliary contacts and a mechanical interlock. Select between a contact system with rigid contact bridge for excellent AC-15 making and breaking capabilities. Also available with gold contacts for use in aggressive envi-ronments. Or select a H-bridge design with „cross-wire“ gold-plated contact system for low voltages and currents. LED-lamps with 4 chips and integrated bridge rectifier, BA9s socket Colour Voltage Article Number white 24 V–28 V AC/DC P SN/LW024 red P SN/LR024 green P SN/LG024 white 220 V AC/DC P SN/LW220 red P SN/LR220 green P SN/LG220 white 110 V–120 V AC/DC P SN/LW110 red P SN/LR110 green P SN/LG110 Front end assembly + function of the mechanical interlock, quantity and operation of the auxiliary contacts and type of the contact system. Control and Indicator Device (without Lamp) Ordering data: 1 Ambient temperature: 35 °C during 24 hours with peaks up to 40 °C Q100B Q100B *E The luminous source is a LED module with yellow lightemitting diode mounted at the end of the switch. The transmission of light occurs via a light conductor. Technical Data: Voltage Frequency Power Consumption 24 V AC 50 - 60 Hz, DC 0,2 W 48 - 60 V AC 50 - 60 Hz 0,3 W 48 - 60 V DC 1 W 110 - 120 V AC 50 - 60 Hz 0,3 W 110 - 120 V DC 1,4 W 220 - 240 V AC 50 - 60 Hz 0,3 W with test terminal: 24 V DC 0,2 W 48 - 60 V DC 1 W 110 - 120 V DC 1,4 W Types of version Without interlock (handle “turn to operate“) With interlock (handle “push to turn“) The control and indicator device is available for single hole mounting and mosaic. Control and Indicator Device with Light Conductor Ordering data: Operating voltage and type of version.
< back to table of contents > Code 10 Optional Extras For Switch Sizes S0 S1 S2 S3 M510B These auxiliary contacts are controlled with a cam which can be programmed. The max. number of the auxiliary contacts for switches of size S1 and S2 is 4 pcs. and for switches of size S3 is 6 pcs. Select between a contact system with a rigid bridge for excellent AC-15 making and breaking capabilities or a H-bridge design with “cross-wire“ contacts (sizes S1 and S2) for low voltages and currents. The contact systems with gold contacts or gold-plated contacts allow for use in aggressive environments also. In cases where more than 4 resp. 6 auxiliary contacts are required, an auxiliary switch should be used alternatively. Auxiliary Contacts Control and Indicator Device (without Lamp) A11 A25 CA40 CA50 CA63 C26 C32 C42 C80 C125 L350L1000 Ordering data: Quantity and operation of the auxiliary contacts and type of the contact system. Dimensions p.29 Size S1 S2 / S3 Rated Insulation Voltage Ui V 440 690 Rated Thermal Current Iu/Ith A 10 16 AC-21 Switching of resistive loads, including moderate overloads A 10 16 AC-15 Switching of control devices, contactors, vales etc. 110 V-240 V 380 V-440 V 500 V A A A 2,5 1,5 - 6 3 1,5 Short Circuit Protection Max. fuse size gG-charakteristic A 10 10 Max. Permissible Wire Gage - copper wires only single-core or stranded wire mm2 1,5 2,5 Flexible wire mm2 1,5 2,5 Flexible wire with sleeving in accordance with DIN 46228 mm2 1 2,5 With square face plate With white lamp socket1 Without lamp socket The lamp socket for switch size S0 had been designed for glowing lamps with socket E10. For switches size S1, S2 and S3 the sockets are provided for lamps with thread E14. With rectangular face plate With white lamp socket1 Without lamp socket 1Additional colors on request. Indicator Lamp Device (without Lamp) Q200/A1 Q200/A2 Q200/B1 Q200/B2 Q100/A Dimensions p.31 Dimensions p. 29 For 6 lamps with socket T6,8 Length of lamp 42-44 mm Max. power per lamp 2,5 W According to the operating voltage the lamps have to be paralleled or connected in series. As front end assembly an alu-face plate 51,8 x 51,8 mm is supplied.
< back to table of contents > Code Optional Extras For Switch Sizes S0 S1 S2 S3 V110A V115A V130A V135A V110 V115 V120 V130 V135 To pull lateral spring return To pull lateral latching To push lateral spring return To push lateral latching The push-pull device is used to interlock the switch so that the handle can be rotated only when pushed or pulled. The push-pull device can be programmed to allow the interlock to operate only between pre-determined switch positions. Auxiliary contacts can be operated by means of the axial movement of the handle. For switches size S0 the max. number of auxiliary contacts is 2 pieces for all other sizes 8 pieces. In addition switches size S0 can also be combined with a trip indicator. To pull lateral spring return To pull lateral latching To pull and to push lateral spring return To push lateral spring return To push lateral latching Push-pull Interlock Ordering data: Description of the interlocking program, number and operation of the auxiliary contacts. V160 The stop and go device prevents a fast switching thru the center OFF position. This is only possible with a 60° switching angle. The stop and go device only becomes activated in the center switch position, in either in both or one direction. Stop and Go Device Ordering data: Operation of the stop and go device. V600/B V600/C For 2 switch columns An interlock between 2 or 3 switch columns permits the operation of one switch only when the other switch or switches are located in a pre-determined switching position. For heavy duty service reinforced devices are available. For 3 switch columns Interlock between Switches Ordering data: Description of the interlocking program. Dimensions p.32 Dimensions p.32 Dimensions p.32 Dimensions p.31 AC-15 220 V-240 V 380 V-440 V 2,5 A 1,5 A AC-15 220 V-240 V 380 V-440 V 5 A 4 A 11
< back to table of contents > Code Optional Extras For Switch Sizes S0 S1 S2 S3 With square face plate Switching only possible if push button is pressed. Up to 4 auxiliary contacts can be operated by pressing the push button. With rectangular face plate Switching only possible if push button is pressed. Push Button Interlock Ordering data: Number and operation of the auxiliary contacts. For switches size S1 The electromechanical interlock locks the switch in any switching position. The interlock device is operated by energizing or de-energizing the electromechanical system. Adding auxiliary contacts to the switch permits the device to be operated only in pre-determined positions. The optional extra S1 V140/2 can be equipped with a positive breaking auxiliary contact according to IEC 60947-5-1 24 V - 600 V 50 Hz/60 Hz 11 W Power Consumption For switches size S2 and S3 or for switches size S1 with DC solenoid Magnet available Voltage: 24V - 240V 50Hz/60Hz /DC 20 W Power Consumption Electromechanical Interlock2 Ordering data: Advise if the interlock is activated either by energizing or de-energizing of the electrical system. Coil voltage also required. 1With auxiliary contacts available only up to switch type CA25B. 2 Ambient temperature: 35 °C during 24 hours with peaks up to 40 °C. V400/A1 V400/B1 1 1 V140 V140 S1E V140/ Dimensions p.33 Dimensions p.33 12
< back to table of contents > 13 Code Optional Extras For Switch Sizes S00 S0 S1 S2 S3 M160 The protective cover prevents accidental contact with current-carrying terminals. Protective Cover C80 C125 C315 C316 L400 Ground terminal Neutral terminal Ground and neutral terminal Ground and Neutral Terminal Tandem Drive For 2 switch columns Two or three switch columns can be operated simultaneously. Special programs are available to reinforce the device for heavyduty applications. For 3 switch columns For 4 switch columns The device is used to couple switches into one column Switches of the same size Switches of different sizes Bayonet/Switch Coupling M300/B M300/C M300/D M270 M275 Dimensions p.35 Dimensions p.32 Dimensions p.34 H040/E H040/N H040/NE C26 C32 C42 A25
< back to table of contents > Heavy duty drive unit The device is designed to allow customer to couple his own operating device to the switch. Heavy duty drive unit with actuator and roller Double action lever Rope operation Available for spring return, maintained or stepping operation. Code 14 Optional Extras For Switch Sizes S0 S1 S2 S3 Special Drives G800/A G800/B G800/C G900/B Dimensions p.35 Dimensions p.35 Dimensions p.35 Dimensions p.35
< back to table of contents > 15 Code Optional Extras For Switch Sizes S0 S1 S2 S3 Spring return from both sides Spring return from one side Spring return for angular displacement up to 30° can be accomplished by using the latching mechanism only. If a large number of contacts must be opened simultaneously or a total angular displacement is larger than 30° over which the spring return is operational, the switch must use one of the spring return devices. Spring return from both sides can be designed to permit maintained position on each side of center. Spring Return over several Positions Ordering data: For M470, specify spring return from either left or right side and details of maintained positions, if required. The uni-directional interlock prevents the switch from being operated counterclockwise. The interlock may be in either all positions or in pre-determined positions only. Uni-directional Interlock Ordering data: Specify which positions should be interlocked. Slip clutch Using the slip clutch, two cam shafts can be coupled in such a way so that the secondary cam shaft will operate only after the primary cam shaft has been moved over a pre-determined angle. This slip clutch allows e. g. the deenergized changing back of switches for pole-changeable motors. Not available for D-switches. Ratchet coupling A ratchet coupling attaches to the rear of the switch. Additional stages are then attached behind the coupling device which serves to operate that portion of the switch only when the handle is turned counterclockwise. When the handle is turned clockwise, the rear switch portion remains in the same position. Slip Clutch and Ratchet Coupling M470/A M470 M400 M200 M230 CA40 CA50 CA63 C26 C32 Dimensions p.31 Dimensions p.34
< back to table of contents > Code 16 1Ambient temperature: 35 °C during 24 hours with peaks up to 40 °C. Optional Extras For Switch Sizes S0 S1 S2 S3 V350/A V350/B V350/C V350/D Operating voltage and frequency: AC/50 Hz AC/60 Hz AC/50/60 Hz DC The device includes a magnetic system which releases the switch to the trip position at voltage failure or undervoltage of 70 % of the nominal voltage. The device is trip-free, in that the switch can be operated only when the primary voltage is available. When using DC voltage, an economy resistor must be provided. Switches with integrated undervoltage release are described on page 23. Electromechanical Trip Device (Undervoltage Release)1 Ordering data: Operating voltage and frequency for the magnetic system. V360/A The device permits the switch to be turned to the trip position by remote control. The coil is designed for shorttime duty requiring an auxiliary contact in the switch which de-energizes the coil in the trip position. On activation, the handle will switch to TRIP position. After a trip has occurred, the handle has to be turned to the OFF position thereby loading the return spring. Manual turning to TRIP position is not possible in the normal operation. Controlling of the magnetic system: 24 V-440 V/50 Hz, 60 Hz or DC Electromechanical Trip Device (Shunt-trip)1 Ordering data: Operating voltage for the magnetic system. R300 The motor drive consists of an AC motor with capacitor, gear train and Geneva gear. This device allows switches to be operated from a remote location. Motor voltages available are 230 V, 50 Hz and 117 V, 60 Hz. Possible control systems: - Follow-up control - Impulse control Further information as well as special control systems upon request. Motor Drive1 Dimensions p.34 Dimensions p.34 Dimensions p.35 OFF ON TRIP
< back to table of contents > 17 1At high safety requirements use V750D/1. Code Optional Extras For Switch Sizes S00 S0 S1 S2 For 1 stage switches in PN enclosure For 2 stage switches in PN enclosure For 1 stage switches with plaster depth trim (With half-cylinder see page 19) For base mounting with type of mounting VE21 For single hole mounting combined with 16/22 mm, protection IP 66/67/69k Micromec lock With front ring (mounting FS1) Face plate 30 x 30 mm (mounting FS2) Face plate 30 x 39 mm (mounting FS4) Locking program in which the key can be removed: Lock 601 With front ring (mounting FS1) Face plate 30 x 30 mm (mounting FS2) Face plate 30 x 39 mm (mounting FS4) Locking program in which the key can be removed: For single hole mounting combined with 22 mm, protection 66/67/69k With front ring (mounting FT1) Face plate 48 x 48 mm (mounting FT2) Face plate 64 x 64 mm (mounting FH3) Face plate 48 x 59 mm (mounting FT6) Face plate 64 x 78,5 mm (mounting FH4) Locking program in which the key can be removed: Ordering data: Locking program of the key. Key Lock device V750/ V750D/ V750D/5 V750D/21 V750D/3 CA4 CG4 CA11 CA20 CA10CA20 CA10 Dimensions p.36 Dimensions p.36 Dimensions p.36 Dimensions p.36 Dimensions p.36 Dimensions p.36
< back to table of contents > Code 18 Optional Extras For Switch Sizes S0 S1 S2 S3 V750D/ V750D/A V750D/A V750D/B V750D/B V750D/ For single hole mounting 25 mm With front ring (mounting EL) For four hole panel mounting Face plate 48 x 48 mm (mounting E) Face plate 64 x 64 mm (mounting EG) Face plate 48 x 60 mm (mounting E) Face plate 64 x 78,8 mm (mounting EG) For snap-on base mounting on track acc. to EN 50022 With face plate for 45 mm knock-out (mounting VE2) Locking program in which the key can be removed: Key-lock Device with Kaba Lock Ordering data: Locking program of the key. V750E The key-lock device V750E with profile cylinder is furnished with a single hole mounting 22 mm for switches in size S0. The key can be removed in one switch position or for switches with 60° switching angle in up to six switch positions. The device with profile cylinder can be supplied with standard lock cylinders manufactured by CES, BKS or IKON. Key-lock Device with Profile Cylinder Dimensions p.37 Dimensions p.37 Dimensions p.37 Dimensions p.37
< back to table of contents > 19 Code Optional Extras For Switch Sizes S0 S1 S2 S3 V750/A1 For single hole mounting 40 mm Face plate 64 x 64 mm (mounting EL2) With front ring (mounting EL1) Key can only be removed in the 12 o’clock position. Central locking systems are available. Key-lock Device with Kaba Lock V755.UE1 S0D V755 12 V755.E For switches with plaster depth trim For 1 stage switches in standard flush mounting box For multiple staged switches in special flush mounting box Protection IP 42 The switch must have an arrested position in 12 o’clock. The key is only removable in the 12 o’clock position. The max. angular displacement is 2 x 135°. Dust cap for key-lock device Protection IP 43 For panel mounting Protection IP 42 The key is removable in the 12 o’clock position. The max. angular displacement is 2 x 120°. Protection IP 42 Additional programs with key removable in 2 positions are available on request. Key-lock Device with Half-cylinder Lock BA20 Dimensions p.38 Dimensions p.38 Dimensions p.38
< back to table of contents > Code 20 Optional Extras For Switch Sizes S0 S1 S2 S3 Safety-key-lock Device with separate Drive V760/A.E V760/B.E V760/A V760/B V765 With small cylinder lock Square face plate Rectangular face plate With commercial half-cylinder lock Square face plate Rectangular face plate With half-cylinder lock Square face plate With dust cap Protection IP 43 Ordering data: Advise locking program and positions in which the key can be removed. Various key positions and locking programs are available. Key positions: Key can be removed in locked and unlocked positions. Key can be removed only in locked positions. Locking programs: 1Locking program 4 permits the locking of the device in any switch position. However, the actual locking becomes effective in a pre-determined switch position only. Locking Program No. Switching Angle Switch Positions To be locked Not to be locked one the balance all none the balance one one1 the balance1 30°-90° 20° 30°-90° 30°-90° 30°-90° 1 2 3 41 Size S0-S3 S1, S3 S0-S3 S1-S3 S0-S3 Dimensions p.38 Dimensions p.38 Dimensions p.38 Dimensions p.38
< back to table of contents > 21 Optional Extras Padlock Device Ordering data: Color variation. For 1 padlock with lock bow diameter for 4-5,5 mm. The handle may be supplied in black and red. The padlock is an integral part of the switch handle itself and can hold 2 padlocks The lock bar is accessible from the bottom. Handle can be sealed in the locked and unlocked positions. The handle may be supplied in black, red and electro-gray. For 1 padlock For mounting VE2 and VE21 with lock bar accessible from the front. Available in red and electro-gray. Up to 4 padlocks The lock bar is accessible from the front and may be supplied in black, red and electro-gray. Spring loaded push rod Up to 4 padlocks Code For Switch Sizes S00 S0 S1 S2 S3 mm 3,5 ‑ 5 V840K mm 3,5 ‑ 4,5 4 ‑ 6 V840A/A mm 3 ‑ 4 V840A/C mm 4,5 ‑ 6 V840B mm 3 - 7 4 - 7,5 4 - 8 4 - 8,5 V845 mm 4 ‑ 7,5 V846 Dimensions p.39 Dimensions p.39 Dimensions p.39 Dimensions p.39
< back to table of contents > Padlock Device 22 Ordering data: Color variation. Padlock device with integrated F- or B-handle The cover disc is available in black, yellow and electrogray. The handle may be supplied in black, red and electro-gray. For 2 padlocks For 3 padlocks With F-handle For 3 padlocks With F-handle For 3 padlocks With B-handle For 4 padlocks With F-handle For 4 padlocks With B-handle For 2 padlocks For 3 padlocks For 6 padlocks Upon request, the device can be programmed to lock in several switch positions. Padlock device for C switches with base mounting for locking when control cabinet is opened. Padlock device with simplified door clutch and single hole mounting see page 8. Code Optional Extras For Switch Sizes S00 S0 S1 S2 S3 mm 3 ‑ 7 V840D mm 4 ‑ 8 V840D mm 7 ‑ 8 V840G mm 7 ‑ 8 V840G/B mm 4 ‑ 7 V840F/F mm 4 ‑ 7 V840F/B mm 3 - 5,5 4- 7,5 4- 7,5 V850 mm 3 ‑ 8 V841 mm 3 ‑ 8 V842 Dimensions p.39 Dimensions p.39 Dimensions p.39 Dimensions p.40 Dimensions p.40 Dimensions p.40
< back to table of contents > 23 1Ambient temperature: 35 °C during 24 hours with peaks up to 40 °C. 2In preparation. Suffix Code Switch Type Variations For Switch Sizes S0 S1 S2 S3 Size S0 The magnetic system includes a low hum DC coil with incapsulated diode rectifier (blocking voltage 1000 V) = it, therefore, works independent of frequency. PFR switches are available with 24 V-600 V coils. Available switching detents: 1 x 60° (60° to the right of center OFF), 2 x 60° (60° to the right and left of center OFF). Alternatively with trip-free release (Switching angle 1 x 60°) The PFR switch series is designed to provide protection for both machines and machine operators by preventing the equipment (which has been operating) from restarting automatically after a power failure. The device includes a magnetic system which releases the switch (by means of a linear spring return mechanism) to the trip position at voltage failure or undervoltage of 70 % of the nominal voltage. Size S1 Operating voltage for the magnetic system: 24 V-500 V/50 Hz 24 V-600 V/60 Hz (Switching angle 1 x 60°) PFR (Power Failure Release)1 Ordering data: Operating voltage for size S0 as well operating voltage a n d frequency for size S1 for the magnetic system. With manual release The lockout-relay is typically used to remotely switch electrical circuits from one power source to another. The device contains a totally incapsulated coil and linear spring return mechanism which is compressed by manually turning the handle to the ON position (60° to the right of OFF). Once in the ON position, the handle is mechanically locked in place and cannot be manually turned back to OFF. When the coil is energized, however, the unit will automatically spring return to the OFF position. A second version is available with push button manual release for test purposes. Technical Data: Voltage Frequency Power Consumption 24 - 28 V AC 50 - 60 Hz, DC 135 VA 32 - 40 V AC 50 - 60 Hz, DC 145 VA 42 - 50 V AC 50 - 60 Hz, DC 155 VA 60 V AC 50 - 60 Hz, DC 165 VA 110 - 125 V AC 50 - 60 Hz, DC 185 VA 220 - 240 V* AC 50 - 60 Hz, DC 220 VA 380 - 440 V* AC 50 - 60 Hz, DC 240 VA * for DC on request Without manual release Lockout-relay1 Ordering data: Operating voltage and frequency for the magnetic system. CA10 CH.. CA10 CH.. X Y X CA.. CA.. CG8 A25 CA40 CA50 CA63 C26 C32 C42 M L A11 A25 CA40 CA50 CA63 C26 C42 A11 A25 CA40 CA50 CA63 C26 Dimensions p.40 Dimensions p.40 Dimensions p.41 Dimensions p.41
< back to table of contents > 24 Code Optional Extras For Switch Sizes S00 S0 S1 S2 S3 F991/A0B/C-PRD F991/A0B-PRD F991/A0B/C-PRB F991/A0B-PRB F991/A0B/C-PRC F991/A0B-PRC F991/A0B/C-PRA F991/A0B-PRA F991/A00/C-P2B F991/A00-P2B F991/A00/C-P2A F991/A00-P2A Add-on face plates for switches with single hole mounting and four hole panel mounting The face plates can be engraved or embossed from the front or alternatively from the back. Face plates in different height are also available. The face plate frame is black, the face plate brushed aluminum. For switch sizes S0, S1, S2 and S3 yellow face plates are also available. Add-on face plates with black face plate frame, face plates brushed aluminum Switches with single hole mounting 22 mm and front ring For front inscription For inscription on the back For front inscription For inscription on the back Switches with single hole mounting or four hole panel mounting 22 mm and square face plate For front inscription For inscription on the back For front inscription For inscription on the back Face plates brushed aluminum For front inscription For inscription on the back For front inscription For inscription on the back Rectangular Add-on Face plates Ordering data: Color variation, if differing from the described version. Dimensions p.41 Dimensions p.41
< back to table of contents > 25 Code Enclosures For Switch Sizes S00 S0 S1 S2 Enclosure series protection IP 66/67, made of strong durable plastic, increased wiring space and cover coupling KS and KL series With high UV-resistance, Flammability Standard: UL94 V - 0 CS and CL series For applications in an aggressive environment, such as oil, chemical substances and grease Each enclosure has 2 knock-outs on top and bottom for metric thread according to EN 50262. Standard equipment includes both a ground and neutral terminal. Size S0 enclosures are also available with lateral conduit knockout and a cover interlock which allows for opening without dismantling the handle. They can also be supplied with a cover locked in 1 position. These enclosures are also available for conduit entries for PG-thread. The following switch types can be mounted: Switch type Max. no. of stages CA4 3 CG4 2 CG6 2 Without cover interlock With cover interlock (the enclosure can only be opened at 9 o’clock position) With cover interlock (the enclosure can only be opened at 12 o’clock position) The following switch types can be mounted: Switch type Max. no. of stages CA10 6 CA11, CA20 5 CA25, CG8, CH10-CHR16 4 Without cover interlock With cover interlock (the enclosure can only be opened at 9 o’clock position) With cover interlock (the enclosure can only be opened at 12 o’clock position) The following switch types can be mounted: Switch type Max. no. of stages CA10 3 CA11 2 CA20, CA25, CG8 2 CH10-CHR16 2 Plastic Enclosures KS3/CS3 KS10/CS10 KS50/CS50 KS11/CS11 KS51/CS51 KS12/CS12 KS52/CS52 KL10/CL10 KL50/CL50 KL11/CL11 KL51/CL51 KL12/CL12 KL52/CL52 M25 M20 M25 M20 M25 M20 M25 M20 M25 M20 M25 M20 M16 Dimensions p.42
< back to table of contents > Code 26 Enclosures For Switch Sizes S0 S1 S2 S3 Plastic Enclosures (Front Drive) Protection IP 65 Conduit entries with metric ISO-thread The following switch types can be mounted: Switch type Max. no. of stages A11 6 CA10, CA11, CA20, CA25, CA10B1, CA11B, CA20B, 4 CH10, CH16 CA40, CA50, CA63 6 C26, C42 4 C32 5 Protection IP 42 Conduit entries with metric ISO-thread The following switch types can be mounted: Switch type Max. no. of stages A11 6 CA10, CA11, CA20, CA25, CA10B1, CA11B, CA20B, 4 CH10, CH16 CA40, CA50, CA63 6 C26, C32 4 C42 3 A lamp can be installed on request. 1Only for 4 stages. PF1 M20 M20 PF4 M25 PN1 M20 M20 PN4 M25 Dimensions p.43
< back to table of contents > 27 Code Enclosures For Switch Sizes S0 S1 S2 S3 Plastic Enclosures Protection IP 44 Conduit entries with metric ISO-thread Conduit entries without thread The following switch types can be mounted: Switch type Max. no. of stages A11 12 CA10, CA10R 12 CA11, CA20, CAD11, CAD12 12 CA10B, CA11B, CA20B 12 Protection IP 65 Conduit entries with metric ISO-thread Without conduit entries The following switch types can be mounted: Switch type Max. no. of stages A11, A25 10 CA10, CA10R 3 CA11 2 CA20 2 CA10B 12 CA11B 10 CA20B 10 CA25B 9 CA40, CA50, CA63 10 Additional conduit entries on request. Aluminum Enclosures PK1 M25 M25 PK9 GK1 M20 M20 M25 GK9 Dimensions p.44 Dimensions p.44
< back to table of contents > Optional Extras Dimensions mm inch Shaft Extension L = Shaft length L1 = Free shaft length max. 1 = Only for square shaft Size L1 L11 L L1 L L1 L L1 L L1 D1 D2 A SW S0 S1 S2 S3 60 40 80 60 100 80 120 100 6 13,8 12 2.36 1.57 3.15 2.36 3.94 3.15 4.72 3.94 .24 .54 .47 56,5 20 70 40 90 60 110 80 130 100 8,5 18,5 6 16 2.22 .79 2.76 1.57 3.54 2.36 4.33 3.15 5.12 3.94 .34 .73 .24 .63 70 40 100 70 130 100 160 130 190 160 11,2 24,6 8 22 2.76 1.57 3.94 2.76 5.12 3.94 6.30 5.12 7.48 6.30 .44 .97 .32 .87 95 40 130 75 165 110 200 145 235 180 14 35,1 10 39 3.74 1.57 5.12 2.95 6.50 4.33 7.87 5.71 9.25 7.09 .55 1.38 .39 1.18 13,8 .54 18,5 .73 S0 S1 Size D L100, L100A, L105A L min. max. S0 S1 30 55 1.18 2.17 28 55 1.10 2.17 Size V840F/V840G M295 L min. max. M295/A S0/S1 M295/B S0/S1 27 112 1.06 4.41 25 90 .98 3.54 L min. max. 48 7,2 52 30 55 1.89 .28 2.05 1.18 2.17 64 8,1 58 28 55 2.52 .32 2.28 1.10 2.17 S0 S1 Size A C H 19 24 28 32 37 42 47 52 57 19,8 23,8 27,8 32,8 37,8 42,8 47,8 52,8 57,8 62,8 67,8 72,8 77,8 82,8 87,8 92,8 97,8 102,8 62 67 72 77 82 87 92 97 102 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 Size S0 S1 S1 S0 Free shaft length for E/EF KN1/KD1 KD2 VE S0 L1-2,3 L1-5,1 - L1 S1 L1-2,5 - L1-2,5 L1 28 Simplified Door Clutch V840E V845 M600 L see L100 and M004D above. M004D, M004E
< back to table of contents > Optional Extras Dimensions mm inch Control and Indicator Device (without Lamps) Q100B Without interlock M = 17,7 C = 5 .70 .20 With interlock M = 19,5 C = 6,5 .77 .26 Q100B *E S0 Q120/A1 - S0 Q120/A5 Q120 Turn to operate C-, DH-switches S0 Q120/A..A1 - S0 Q120/M..D5 Q120 Push-to-turn operation with a/c C-, DH-switches Q100/A Face plate 51,8 x 51,8 mm S0 Q120/A00Z1 - S0 Q120/Z00Z5 Q120 Push-to-turn operation without a/c C-, DH-, DK-switches With adaptor ring Lamp (LED recommended) Size M D 16 64 18,7 84 17 128 Size M D 16 64 18,7 84 17 128 S1 S2 S3 Auxiliary Contacts M510B E mounting VE mounting S1 S2 S3 29
< back to table of contents > Optional Extras Dimensions mm inch 30 Standard Door Clutch M280D, M280D/.EF, M280E, M280E/.EF For switches of size S0 For switches of size S1 and S0 For switches of size S2 and S3 L = Shaft length Size L L L L D1 S0 S0 S1 S2 S3 36 55 56 75 76 95 96 116 19-22 1.42 2.17 2.20 2.95 2.99 3.74 3.78 4.57 .75-.87 36 55 56 75 76 95 96 116 19-22 1.42 2.17 2.20 2.95 2.99 3.74 3.78 4.57 .75-.87 32 57 58 77 78 97 98 118 19-22 1.26 2.24 2.28 3.03 3.07 3.82 3.86 4.65 .75-.87 60 90 90 120 120 150 150 180 26-30 2.36 3.54 3.54 4.72 4.72 5.91 5.91 7.09 1.02-1.18 60 95 95 130 130 165 165 200 26-30 2.36 3.74 3.74 5.12 5.12 6.50 6.50 7.87 1.02-1.18 M701 M700 M800 M810
< back to table of contents > 31 Optional Extras Dimensions mm inch Indicator Lamp Device Stop and Go Device Spring Return over several Positions V160 Q200/A1, Q200/A2, Q200/B1, Q200/B2 For switches of size S0 For switches of size S1 For switches of size S2 For switches of size S3 M470/A, M470 33,3 33,3 1.31 1.31 40,3 29,2 1.59 1.15 33,3 22,2 1.31 .87 75 2.95 S0 S01 S11 S2 Size M470/A M470 M M 1shaft hole 18,5 mm/.73 inch
< back to table of contents > Optional Extras Dimensions mm inch 32 Push-pull Interlock Interlock between Switches and Tandem Drive V110A, V115A, V130A, V135A M = Additional length of the switch V110, V115, V130, V135 M = Additional length of the switch V110, V120, V130 M1 = Additional length of the switch M2 = Additional length of the auxiliary switch FT2, FH3 E, EG E1 V110A V115A V130A V135A EG2 V110A V115A V130A V135A FT2 V110A V115A V130A V135A FH3 V110A V115A V130A V135A M M S 17,5 33,5 24,5 40,5 24,0 40,0 31,0 47,0 .69 1.32 .96 1.59 .94 1.57 1.22 1.85 33,5 33,5 40,5 40,5 40,0 40,0 47,0 47,0 1.32 1.32 1.59 1.59 1.57 1.57 1.85 1.85 1-2 1-2 1-2 1-2 1-6 1-6 1-6 1-6 .04-.08 .04-.08 .04-.08 .04-.08 .04-.24 .04-.24 .04-.24 .04-.24 Mounting w/o a/c with a/c 39,9 57,4 74,9 92,4 0-4 1.57 2.26 2.95 3.64 0-.16 S1 1 29,5 47 64,5 82 0-4 1.16 1.85 2.54 3.23 0-.16 S1 Size No. of auxiliary contacts 0-2 3 + 4 5 + 6 7 + 8 M M M M S 51,7 101,4 120,4 139,4 158,4 0-4,5 2.04 3.99 4.74 5.49 6.24 0-.18 69 127,6 146,6 165,6 184,6 0-5,5 2.72 5.02 5.77 6.52 7.27 0-.22 85 151,6 170,5 189,5 208,5 0-7 3.35 5.96 6.71 7.46 8.21 0-.28 S11 S2 S3 Size No. of auxiliary contacts 0 1 + 2 3 + 4 5 + 6 7 + 8 M1 M1+M2 M1+M2 M1+M2 M1+M2 S 1Only for V120 48 66 8,5 62 128 194 260 25 1,4-4,5 1.89 2.60 .34 2.44 5.04 7.64 10.24 .98 .06-.18 68 93 11,2 92 183 276 369 30 1,5-7,0 2.68 3.66 .44 3.62 7.20 10.87 14.53 1.18 .06-.28 88 144 14 130 274 418 562 24 1,5-8,3 3.46 5.67 .55 5.13 10.79 16.47 22.13 .94 .06-.33 S1 S2 S3 Size A B D E F G H M S 1 For switch type CA..B, CH..B, CG..B, DH..B 1shaft hole 15-19 mm/.59-.75 inch 2shaft hole 19-22 mm/.75-.87 inch V600/B, V600/C, M300/B, M300/C, M300/D
< back to table of contents > 33 Optional Extras Dimensions mm inch Push Button Interlock Electromechanical Interlock V400/A1, V400/A2, V400/B1, V400/B2 V140 For switches of size S0 and S1 For switches of size S2 For switches of size S3 For switches of size S1 For switches of size S1, S2 and S3 M1 = Additional length for the interlock M2 = Additional length for the coupling pieces of the solenoid Additional length for the solenoid upon request. Size 21,7 34,4 .85 1.35 L No. of auxiliary contacts 2 4 56 0-4 2.20 0-.16 102 0-5,5 4.02 0-.22 111,1 0-7 4.37 0-.28 S1 S2 S3 M1 + M2 S M S1 CA40-63, A11, A25 13 0.51 35.2 1.39
< back to table of contents > Optional Extras Dimensions mm inch 34 Bayonet/Switch Coupling Slip Clutch and Ratchet Coupling M270 9,8 .39 12,9 .51 32,9 1.30 S1 S2 S3 Coupled switch S1 S2 S3 M M M Size Main switch M275 0 5,5 0 .22 1,3 0,8 .05 .03 10,2 4,4 2,9 .40 .17 .11 12,7 12,2 11,4 11,4 .50 .48 .45 .45 S0 S1 S2 S3 Coupled switch S00 S0 S1 S2 M M M M Size Main switch Electromechanical Trip Device (Undervoltage Release and Shunt-trip) M200, M230 M = One switch stage V350/A, V350/B, V350/D V360/A, V360/B, V360/D
< back to table of contents > 35 Optional Extras Dimensions mm inch Special Drive Units Ground and Neutral Terminal Motor Drive H040/E, H040/N, H040/NE R300 G800/A G800/B G900/B G800/C
< back to table of contents > Optional Extras Dimensions mm inch 36 Key-lock Device with small Cylinder Lock V750 64 50 68,8 36 26 2.52 1.97 2.71 1.42 1.02 82 68 75,5 52 29 3.23 2.68 2.97 2.05 1.14 CA10 CA11, CA20 2 1 + 2 Switch type No. of stages A B C E F Conduit entries 4 x ISO 20 20 Front ring 29,5 mm Ø (mounting FS1) Face plates 30 x 30 mm (mounting FS2) 30 x 39 mm (mounting FS4) Front ring 39 mm Ø (mounting FT1) Face plate 48 x 48 mm (mounting FT2) 64 x 64 mm (mounting FH3) 48 x 59 mm (mounting FT6) 64 x 78,5 mm (mounting FH4) V750D/5 and V750D/2 V750D/3 For 1 stage CA10 switches with plaster depth trim For single hole mounting combined with 16/22 mm For single hole mounting 22 mm For base mounting with type of mounting VE21 max. 5,5 .22" 1.27" 31,8 12,5 .49" 1.77" 45 L S A Switch Type A L CA4, CG4 35,57 45 CA10, CA11, CA20, CA25, CG8, CH10, DH10 52,3 56,6 Fl. CA4 CG4 CA10 CA11 CA20 CA25 CG8 CH10 DH10 S S Smin Smax Smin Smax Smin Smax Smin Smax Smin Smax Smin Smax Smin Smax 1 - 444452485648565058526054605460 24454 54 60 60 68 60 68 64 72 64 72 68 74 72 74 35068 64 72 72 74 74 74 - - - - - - - - 4 58 - 72 74 - - - - - - - - - - - - 5 68 - - - - - - - - - - - - - - -
< back to table of contents > 37 Optional Extras Dimensions mm inch Key-lock Device with Kaba Lock Key-lock Device with Profile Cylinder V750D V750D/A, V750D/B V750D/A, V750D/B V750D (mounting VE2) With front ring (mounting EL) Face plates 48 x 48 mm (mounting E) 48 x 60 mm (mounting E) 1-3,5 40,3 .04-.14 1.59 1-12,5 49,3 .04-.49 1.94 1A-1G 2G-2L S L Locking program Face plates 64 x 64 mm (mounting EG) 64 x 78,8 mm (mounting EG) 1-3,5 39,8 .04-.14 1.57 1-12,5 48,8 .04-.49 1.92 1A-1G 2G-2L S L Locking program Max. no. of stages S = 1 - - - - 2 1 1 1 1 - 2 2 - - 3 2 2 - - CA10 CA11 CA20 CG8 CH10 50 mm 1.97“ 61 mm 2.40“ 67 mm 2.64“ 69 mm 2.72“ V750E 37,2 1.46 47,2 1.86 1A-1G 2G-2L M Locking program
< back to table of contents > Optional Extras Dimensions mm inch 38 Key-lock Device with Kaba Lock Key-lock Device with Half-cylinder Lock Safety Key-lock Device with separate Drive V750/A1 V755.UE1 V755.E V760/A.E, V760/B.E, V760/A, V760/B V765 Different drilling plans V790 With face plate 64 x 64 mm (mounting EL2) With front ring (mounting EL1) Different drilling plans 48 36 82 12 40 24 1.89 1.42 3.23 .47 1.57 .94 64 48 112 14,8 48 32 2.52 1.89 4.41 .58 1.89 1.26 88 68 146 – 70 44 3.46 2.68 5.75 – 2.76 1.73 130 104 181,5 – 86 65 5.12 4.09 7.15 – 3.39 2.56 S0 S1 S2 S3 Size of the optional extra A B C E F G 31 8,5 22-23 5 9,5 1-4 1.22 .33 .87-.91 .20 .37 .04-.16 34,5 10 34 5 20,2 1-4 1.36 .39 1.34 .20 .80 .04-.16 35,5 12 34 5,4 15,5 1-5,5 1.40 .47 1.34 .21 .61 .04-.22 36,5 15 34 7 24 1-7 1.44 .59 1.34 .28 .94 .04-.28 H D1 D2 D3 M S S0 S1 S2 S3
< back to table of contents > 39 Optional Extras Dimensions mm inch Padlock Device V840A For 2 padlocks V840B For 2 padlocks V840D For 2 padlocks V840G, V840D For 3 padlocks V840G/B For 3 padlocks V840F/F For 4 padlocks V840F/B For 4 padlocks V840K For 1 padlock V845, V846 (S1 only) 27,7 31,5 5 1.07 1.24 .20 35 40 7 1.38 1.57 .28 S0 S1 Size A B C 48 51 7,2 1.89 2.01 .28 64 58 8,1 2.52 2.28 .32 88 73 9 3.46 2.87 .35 130 86,5 9,2 5.12 3.41 .36 S0 S1 S2 S3 Size A B C 64 40,1 9,2 2.52 1.58 .36 88 49,3 10 3.46 1.94 .39 V840G V840D A B C
< back to table of contents > Optional Extras Dimensions mm inch 40 Padlock Device PFR (Power Failure Release) V841 V850 For 2 padlocks For 3 padlocks For 6 padlocks Size S0 Without trip-free release With trip-free release Size S1 23,3 .92 31,5 1.24 M 10-15/.39-.59 8-15/.31-.59 10-15/.39-.59 19-22/.75-.87 S1 V850/A1 S1 V850/11 S1 V850/12 S1 V850/13 D 26-30/1.02-1.18 10-15/.39-.59 26-30/1.02-1.18 26-30/1.02-1.18 S2 V850/A1 S2 V850/11 S2 V850/12 S2 V850/13 D 15.5-20/.61-.79 26-30/1.02-1.18 15.5-20/.61-.79 22-25/.87-.98 S3 V850/A1 S3 V850/11 S3 V850/12 S3 V850/13 D V842 M S1 10,2 CA40-63, A25 22,9
< back to table of contents > 41 Optional Extras Dimensions mm inch Lockout-relays Rectangular Add-on Face Plates PRA PRB F991/...-..., F991/.../C-... PRC PRD With manual release Without manual release 29,5 47,8 63,8 87,8 129,8 29,5 47,8 1.16 1.88 2.51 3.46 5.11 1.16 1.88 35 48 60 80 115 35 48 1.38 1.89 2.36 3.15 4.53 1.38 1.89 4 4 5 6 7 4 4 .16 .16 .20 .24 .28 .16 .16 0,7 0,7 0,8 1 1,2 0,7 0,7 .03 .03 .03 .04 .05 .03 .03 A B C M PRA PRB S00 S0 S1 S2 S3 S00 S0 29,5 47,8 63,8 29,5 47,8 1.16 1.88 2.51 1.16 1.88 25,5 36 47 25,5 36 .98 1.42 1.85 .98 1.42 4 4 5 4 4 .16 .16 .20 .16 .16 0,7 0,7 0,8 0,7 0,7 .03 .03 .03 .03 .03 A B C M PRC PRD S00 S0 S1 S00 S0 M S0, S1 10,2 CA40-63, A25 22,9
< back to table of contents > Enclosures Dimensions mm inch 42 Plastic Enclosures CA4 CG4 CA4 CG4 CG6 CA10 CA11 CA20, CA25, CG8 CH10-CHR16 CA10 CA11, CA20 CA25, CG8, CH10-CHR16 CA10 CA11, CA20, CA25, CG8 CH10-CHR16 Mounting Switch type Max. no. of stages A B C 4 x D1 2 x D2 E 2 1 3 2 2 4 3 2 2 6 5 4 3 2 2 90 3.54 90 3.54 121 4.76 121 4.76 160 6.30 70 2.76 70 2.76 86 3.39 86 3.39 85 3.35 60 2.36 77 3.03 80 3.15 106 4.17 80 3.15 16 .63 16 .63 20/25 .79/.98 20/25 .79/.98 20/25 .79/.98 - - 20 .79 20 .79 20 .79 82 3.23 82 3.23 110 4.33 110 4.33 150 5.91 Conduit entries KS3 CS3 KS10, KS11, KS12 CS10, CS11, CS12 KS50, KS51, KS52 CS50, CS51, CS52 KL10, KL11, KL12 KL50, KL51, KL52 CL50, CL51, CL52 CL10, CL11, CL12
< back to table of contents > 43 1CA10B only for 4 stages Enclosures Dimensions mm inch Plastic Enclosures (Front Drive) For switch type CA10 For switch type CA11, CA20, CA10B, CA11B, CA20B, CH10, CH16, CA25 For switch type A11, CA40, CA50, CA63 M25 M20 M20 M20 M20 M20 M25 89 94,5 132 137,5 36,6 41,3 45,8 50,8 55,3 60,3 64,8 69,8 59,7 64,7 85,1 90,1 59,7 64,7 85,1 90,1 93 98 59,7 64,7 85,1 90,1 93 98 89 94,5 132 137,5 1-3 4-6 1 2 3 4 1 + 2 3 + 41 1 2 + 3 4 1 + 2 3 4 1-3 4-6 A11 CA10 CA11, CA20, CA11B, CA20B CA11, CA20, CA10B, CA11B, CA20B CH10, CH16 CA25 CA40, CA50, CA63 Switch type No. of stages PN. C PF. C ISO / / /
< back to table of contents > Enclosures Dimensions mm inch 44 Plastic Enclosures (Lateral Drive) Aluminum Enclosures Conduit entries Z1 Z3 ISO A B C E F G Max. no. of stages Switch type CA10, CA10R, CAD11, CAD12, CA10B A11, CA11, CA20, CA11B, CA20B CA10, CA10R, CAD11, CAD12 CA10B A11, CA11, CA20, CA11B, CA20B CA10, CA10R, CAD11, CAD12 CA10B A11, CA11, CA20, CA11B, CA20B CA10, CA10R, CAD11, CAD12, CA10B A11, CA11, CA20, CA11B, CA20B A11, CA11, CA20, CA11B, CA20B A11, CA11, CA20, CA11B, CA20B 4 3 7 6 5 10 9 7 12 9 11 12 92 90 75 80 68 12 3.62 3.54 2.95 3.15 2.68 .47 115 90 75 80 91 12 4.53 3.54 2.95 3.15 3.58 .47 140 90 75 80 116 12 5.51 3.54 2.95 3.15 4.57 .47 165 90 75 80 141 12 6.50 3.54 2.95 3.15 5.55 .47 190 90 75 80 166 12 7.48 3.54 2.95 3.15 6.54 .47 215 90 75 80 191 12 8.46 3.54 2.95 3.15 7.52 .47 - M25 - M25 - M25 - M25 - M25 - M25 / CA10, CA10R CA11, CA20 CA10B CA11B, CA20B CA25B A11, A14 CA10B CA11B CA20B, CA25B CA40, CA50, CA63 A11, A14 CA10B CA11B, CA20B CA25B CA40, CA50, CA63 No. of stages Switch types 3 2 4 3 2 5 7 6 5 5 10 12 10 9 10 Conduit entries Z1 Z2 ISO - M20 - M20 - M25 - M25 A B C D E F F1 80 75 57 4,8 63 - 52 3.15 2.95 2.24 .19 2.48 2.05 100 100 80 4.8 86 66 - 3.94 3.94 3.15 .19 3.39 2.60 140 140 90 7 120 93 - 5.51 5.51 3.54 .28 4.72 3.66 200 140 90 7 93 180 - 7.87 5.51 3.54 .28 3.66 7.09
45 Notes:
46 We reserve the right to make technical and dimensional changes without prior notice. The Range of “Blue Line” Switchgear Technical literature covering the following products is available on request. Catalog Number Main Switches and Main Switches with Emergency Function 16 A-315 A Maintenance Switches 20 A-315 A Switch Disconnectors 20 A-315 A According to IEC 60947-3, EN 60947-3, VDE 0660 part 107, IEC 60204, EN 60204 and VDE 0113 C, CA and CAD Switches 10 A-315 A and L Switches 350 A-2400 A C, CA and CAD switches are designed for universal application. They are recommended for instrument, isolator, double-throw and motor control. L switches are designed for load and off-load applications. They are used to switch resistive or low inductive loads. Optional Extras and Enclosures The complete product line, a large number of optional extras is available, including door interlocks, push-pull devices, cylinder and padlock attachments, control and indicator devices, AC motor drives, as well as enclosures, both insulated and metal. A and AD Switches 6 A-25 A A and AD switches have 4 contacts in each switching stage. These switches provide an extensive range of switch functions and require a minimum mounting depth. Up to 24 switching positions are possible, with availability of 48 contacts per 12 stage switch column. CG, CH and CHR Switches 10 A-25 A Ultra compact CG, CH and CHR switches are ideally suited for control and instrumentation applications. Switch terminals are “finger-proof” and conveniently accessible for wiring and are delivered open. All CG4 switches offer specially designed gold plated contacts or H-bridges with “cross-wire” contact systems, which facilitates their use in electronic circuitry and chemically aggressive environments. DH, DHR, DK and DKR Switches 6 A-16 A DH, DHR, DK and DKR switches incorporate unique corrosion resistant contacts that permit operation on system voltage as low as 1 V. They have fully enclosed and protected contacts which can be operated either by rotary and/or lateral handle movement. D switches are used in calibration and semiconductor circuits. They are also used for relay and contactor control. X Switches 200 A-630 A X switches can be applied for load, tap and gang switching duties. They incorporate 6 contacts in each switching stage. Their compact design provides a minimum length dimension for mounting purposes. KG Switches 20 A-315 A and KH and KHR Switches 16 A-80 A KG, KH and KHR switches are excellent circuit interruptors. They have high through fault and fault making capacities and are especially designed for use as isolators and safety switches for machine tools, distribution panels and switchboards. KG ON/OFF switches offer unusually high dimensioned air and creepage distances between terminals which are designed for time saving “straight-line” wiring. ON/OFF switches are available with up to 8 poles and double-throw switches are available with up to 4 poles. Push Buttons and Pilot Lights, 22,5 mm Ø A complete range of state-of-the-art push buttons and pilot lights represent an ideal combination of functional security and economical efficiency in a modular design. 500 100 101 110 120 130 140 150 302
www.krausnaimer.comRkJQdWJsaXNoZXIy MTAxNzE=