< back to table of contents > Code Optional Extras For Switch Sizes S0 S1 S2 S3 V110A V115A V130A V135A V110 V115 V120 V130 V135 To pull lateral spring return To pull lateral latching To push lateral spring return To push lateral latching The push-pull device is used to interlock the switch so that the handle can be rotated only when pushed or pulled. The push-pull device can be programmed to allow the interlock to operate only between pre-determined switch positions. Auxiliary contacts can be operated by means of the axial movement of the handle. For switches size S0 the max. number of auxiliary contacts is 2 pieces for all other sizes 8 pieces. In addition switches size S0 can also be combined with a trip indicator. To pull lateral spring return To pull lateral latching To pull and to push lateral spring return To push lateral spring return To push lateral latching Push-pull Interlock Ordering data: Description of the interlocking program, number and operation of the auxiliary contacts. V160 The stop and go device prevents a fast switching thru the center OFF position. This is only possible with a 60° switching angle. The stop and go device only becomes activated in the center switch position, in either in both or one direction. Stop and Go Device Ordering data: Operation of the stop and go device. V600/B V600/C For 2 switch columns An interlock between 2 or 3 switch columns permits the operation of one switch only when the other switch or switches are located in a pre-determined switching position. For heavy duty service reinforced devices are available. For 3 switch columns Interlock between Switches Ordering data: Description of the interlocking program. Dimensions p.32 Dimensions p.32 Dimensions p.32 Dimensions p.31 AC-15 220 V-240 V 380 V-440 V 2,5 A 1,5 A AC-15 220 V-240 V 380 V-440 V 5 A 4 A 11
RkJQdWJsaXNoZXIy MTAxNzE=