< back to table of contents > Standard Door Clutch Ordering data: Dimension from face of the switch to the cover or dimension from mounting surface to cover as well as the interlock program and the color selection. 7 With shaft extension, shaft with unlimited adjustable length shaft fixation with set screw Front protection IP 40 Front protection IP 66/67 Door clutches M700/M7011 For 3 padlocks Handle lockable with padlocks Protection IP 66 The face Plate is available in black, yellow and alu. The handle may be supplied in black and red. The door coupling has a door-interlock in position “I”. If a padlock device is being used, the door-interlock is in position “0”. Normally, the cabinet door can be opened only if the switch is in position “0”. The door-interlock can be unlocked in position “I” with the included special tools. A maximum of 3 padlocks with shackle diameter up to 8 mm is allowed. In addition, a shaft extension is required. Standard handle and standard face plate Protection IP 66 The door-interlock unlocks in position “0” (for size S0 - S2). In addition, a shaft extension is required. Unlock insert for the M700 ff. To open the door in ON-position. (After the locking has been made inactive, it is necessary to take effective precautions against an opening of the door by unauthorized persons.) Door clutches M800/M810.1 For 3 padlocks Door clutch utilizes a simple and robust design and features a compact size. It has an interlock in the ON-position while a padlock can be fitted in the OFF-position. The door clutch may be opened only if the switch is in the OFF-position. In special cases, however, authorized people have a requirement to open the door, even if the switch is in the ON-position. Further characteristics are the single hole mounting with IP 66/67 protection degree, as well as the Accepted Misalignment up to ± 3 mm horizontally and ± 5 mm vertically. Maximum 3 padlocks with a minimum shackle diameter from 5 up to 7,5 mm are possible. Code Optional Extras For Switch Sizes S0 S1 S2 S3 Dimensions p.30 Dimensions p.30 Dimensions p.30 M280E M280E/.EF mm 4 ‑ 8 M700 M701 S1D M700 29 mm 5 ‑ 7,5 M800 M810
RkJQdWJsaXNoZXIy MTAxNzE=