www.krausnaimer.com MAIN, SAFETY AND MAINTENANCE SWITCH 111 MAIN CATALOG Padlock device with integrated door clutch Door clutch with single hole mounting 22 mm, IP66/67 M800/. Handle lockable with padlocks (from KG41B) M810/. With shortened handle (KG41B – KG100) Additional shaft extension is required. The M800/M810 provides multiple lock functions. Standard operation: cabinet door is locked in position "I" and can only be opened in position "0". Maintenance operation: After a padlock device is applied (only possible in "0" position) cabinet door and switch are locked. To allow in special cases maintenance under voltage the M800/M810 does have an "override function" which enables to open the cabinet door as well in the "I" position. Further features are the single hole mounting and the centering aid up to ± 3 mm horizontally and ± 5 mm vertically. Maximum 3 padlocks with min. 5 to max. 7.5 mm U-bolt diameter are possible. The maximum free length of shaft is 120 mm M800 M810 22,3+ 0,4 0 3,2+ 0,2 0 24,1+ 0,4 0 S 4 max 8,8 50 50 Ø 63,6 4 max 8,8 50 Ø 63,6 S For switch size see page 114. Switch-side padlock device in combination with M800 and M810 acc. to UL508A 1 For square profile (only factory provided) Padlock device for switches in base mounting for applying a padlock at open V842. cabinet door. (Not for KG10) 1 Switch types of the KG series are according to UL508 and CSA-22.2 no. 14-05 approved as "disconnect switches for use in motor circuits" for use in branch circuit only. Padlock device with integrated door clutch for low installation depth Door clutch with single hole mounting 22 mm, IP66 V840E With padlock device A shaft extension is required (Lockable at 9:00 o'clock) Coloring Plate ring Handle Lock bar V840E/E / 2 2 = black red yellow 5 = black black black S min. KG10B 23 KG20B, KG32B 24,5 KG41B, KG64B 20 KG80, KG100 23 KG125 – KG317 1 21 1 Only for ON/OFF switch 3 and 4 pole For Switch size dimensions see page 114. M810 M800 S 8,5 55,5 Ø 55 4 max 31 22,3+ 0,4 0 3,2+ 0,2 0 24,1+ 0,4 0 Coloring Front ring Handle Lock bar M800/ + M810/ A A =black black red B =yellow red yellow S min. KG41B, KG64B 59 KG80, KG100 56 KG125 – KG317 56 Optional extras for customizing (available only in combination with a switch) – Optional extras Necessary ordering information: Entire mounting depth from switch incl. door clutch. 29 Ø 8 max. 30 < Back to the catalog directory
RkJQdWJsaXNoZXIy MTAxNzE=