CONTROL SWITCHES AND LOAD SWITCHES www.krausnaimer.com 147 MAIN CATALOG Electromechanical interlock Ordering data: Advise if the interlock is activated either by energizing or de-energizing of the electrical system. Coil voltage also required. V140 13 1-4 48 66 48 62 92 35 Ø 8,5 62 V140 S1E.V140.K Tandem drive M300/B For 2 switch columns (Switch size S1–S3) M300/C For 2 switch columns (Switch size S1–S3) Two or three switch columns can be operated simultaneously. Special programs are available to reinforce the device for heavy duty applications. (Switch programs for CA40–CA63 and A-switches On request) M300/B M300/C Size A B D E F G M S S1 48 66 8,5 62 128 194 23,2 1,4 – 4,5 S2 68 93 11,2 92 183 276 30 1,5 – 7 S3 88 144 14 130 274 418 24 1,5 – 8,3 Optional extras Integrated AC solenoid (Switch size S1) The switch can be locked in any position by an electromechanical interlock. The interlock device is operated by energizing or de-energizing the electromechanical system. Adding Auxiliary contacts to the switch permits the device to be operated only in predetermined positions. Ambient temperature: 35 °C during 24 hours with peaks up to 40 °C (Switch program CA40 on request) Major features Frequency 50 Hz, 60 Hz, 50/60 Hz Possible voltage 24 V–600 V Pull-in power 55 VA/50 Hz oder 70 VA/60 Hz Holding power 11 W Solenoid with integrated rectifier (Switch size S1 (except CA10B ff.), S2, S3) The switch can be locked in any position by an electromechanical interlock. The interlock device is operated by energizing or de-energizing the electromechanical system. Adding Auxiliary contacts to the switch permits the device to be operated only in pre-determined positions. Ambient temperature: 35 °C during 24 hours with peaks up to 40 °C Notice: Solenoid not UL approved Major features Dual frequency 50/60 Hz and DC Possible voltage 24 V, 48V, 60 V, 110 V, 125 V, 230 V and 240 V Completely encapsulated coil, temperature at the surface of 80-85°C at an ambient temperature of 25°C Magnetic force 12 N, Hub 7 mm, on-time 100 % Weight of solenoid ca. 1 kg IP-code solenoid IP65 Max. terminal cross-section 3 x 1,5 mm2 Max. current 1,5 A Pull-in and holding power 20 W Armature cover For increased safety requirements. Additional length: 10 mm M1 = Additional length for interlocks M2 = Additional length for support plate Baugröße M 1 + M 2 S S1 56 0-4 S2 102 0-5,5 S3 111,1 0-7 < Back to the catalog directory >
RkJQdWJsaXNoZXIy MTAxNzE=